Digital Instrument for Yamaha FZ FI 150 2.0 Motorcycle Display

◎  Turn off the motorcycle power supply (remove the key) and ensure a safe installation process;

◎  Locate the original dashboard wiring connector of the motorcycle, and remove the old dashboard plug;

◎  According to the "wiring diagram instructions", connect the wiring of this product to the motorcycle wiring one by one (it is recommended to wrap the interface with insulating tape to prevent loosening);

◎  First connect the "ground wire (green)" and "positive power wire (black)", and test if the screen lights up normally when powered on;

◎  Test if the turn signal, gear display, and oil level signal functions are normal, and confirm there are no errors before fixing the dashboard;

◎  After installation is completed, start the motorcycle and check if all functions respond synchronously.

Button Description:

Short press switches between trip and total mileage.In trip mode, long press resets the trip meter.In total mileage mode, long press enters hour adjustment mode.Short press adjusts the hours, long press switches to tens of minutes adjustment.Short press adjusts the tens of minutes, long press switches to ones of minutes adjustment.Short press adjusts the ones of minutes, long press exits back to total mileage mode.Quick double press switches the backlight color.

1. To avoid damage to the product due to incorrect wiring, please consult a motorcycle mechanic if you have no installation experience.

2. Each of our products undergoes testing before shipment. After installation, if some functions are not working properly, please first check if the wiring connections are correct and secure. If the problem persists, please consult a mechanic. If the mechanic's inspection reveals that the dashboard is indeed damaged without cause, please contact our after-sales staff.