Digital Instrument for Yamaha Zuma125 Motorcycle Speedometer

Method A: Power down motorcycle completely for safety.

Method B: Remove factory instrument assembly properly.

Method C: Connect replacement system wiring accurately.

Method D: Test basic electrical functions.

Method E: Validate all indicator operations.

Method F: Complete installation procedure.

◎  Speed: The maximum display speed is 299 km/h.

◎  Odometer: The total mileage ODO has a maximum display of 999,999 km, with the option to switch between total and trip mileage. The trip mileage TRIP has a maximum display of 999.9 km.

◎  Fuel level: Displays fuel level with 5 lines. When the fuel is too low, the first bar flashes, and if the fuel sensor is disconnected, all bars flash.

◎  RPM: The maximum RPM is 15,000 r/min, indicated by a stepper motor. If RPM exceeds 10,000 r/min, the over-speed RPM warning light is activated.

◎  Indicator lights: Left turn signal: Green；Right turn signal: Green；High beam: Blue；RPM over-speed warning: Red；Neutral: Green；Low fuel warning: Yellow；Water temperature warning: Red；Engine fault (EFI): Yellow；Voltage warning: Red.

◎  Backlight: The wave crystal backlight is 7-color adjustable, and the dial backlight is blue.

1. Consult professional mechanic to prevent wiring errors.

Guideline.

2. All units tested before shipment. Check wiring first if problems occur. Contact after-sales for defective items.