Digital Motorcycle Gauge for Honda Grom Msx125 2014-2020 CRF250L

Procedure 1: Ensure complete power disconnection by removing the motorcycle key for installation safety.

Procedure 2: Identify the original dashboard wiring harness interface and detach the old instrument panel connector.

Procedure 3: Following the wiring diagram instructions, connect each product wire to corresponding motorcycle wiring (using insulating tape is advised).

Procedure 4: Initially connect the ground wire (green) and positive power wire (black), then apply power to verify screen illumination.

Procedure 5: Test turn signal operation, gear display, fuel level signals and confirm proper function before securing the dashboard.

Procedure 6: After installation completion, start the motorcycle and re-check synchronization of all functions.

◎  Short press the left button to switch between total mileage and trip mileage; in total mileage mode, long press the left button to switch between metric and imperial units; in trip mileage mode, long press the left button to reset the trip mileage.

◎  Short press the right button to adjust the backlight color (seven colors available).

◎  Long press the right button to enter the clock adjustment mode. The hour digit will blink, short press the right button to increase the hour, and long press the right button to increase the speed faster. Short press the left button to switch to the minute digits blinking. After adjusting the minutes by pressing the right button, press the left button to exit the adjustment and save the settings.ur or minute digits are flashing, the time setting mode will exit automatically.

Guideline 1: To avoid potential product damage from incorrect wiring, if you lack installation experience, we recommend consulting a professional motorcycle mechanic for proper installation.

Guideline 2: All products undergo testing before shipment. After installation, should any functions fail to operate properly, first examine whether wiring connections are correctly established and secure. If problems persist after connection verification, consult a mechanic. Should the instrument panel be confirmed as defective without apparent cause following mechanic inspection, please contact our after-sales service personnel.