Digital Universal Motorcycle Speedometer for Honda XR 150

Process 1: Ensure complete power shutdown by removing ignition key for installation safety.
Process 2: Identify original dashboard wiring harness interface and disconnect old panel connector.
Process 3: Follow wiring diagram to connect each product wire to motorcycle wiring (use insulating tape).
Process 4: Connect ground (green) and positive (black) wires first, then power on to check screen.
Process 5: Test turn signals, gear display, fuel signals and confirm operation before securing.
Process 6: After installation, start motorcycle and verify all functions work together.

◎  Speed: The maximum displayed speed is 199 km/h.

◎  Odometer: The total mileage (TOTAL) can display up to 999,999 km, and will reset after exceeding this value; the trip meter (TRIP) can display up to 999.9 km.

◎  RPM: The maximum displayed RPM is 12,000 rpm, with a precision of 500 rpm, shown by a photoelectric encoder.

◎  Fuel: Displays 6 levels of fuel; when fuel is low (86±3Ω), the first segment blinks, and when the fuel sensor is disconnected, all segments blink.

◎  Indicator Lights: Left and right turn signals and position light are green; high beam is blue; EFI is orange.

◎  Light brightness is not adjustable.

1. To avoid damage from incorrect wiring, if inexperienced, consult motorcycle mechanic for installation.

2. All products tested before shipping. After installation, if functions don't work, check wiring first. If issues remain, consult mechanic. If panel defective without cause, contact after-sales service.