Digital Universal Motorcycle Speedometer for Honda NXR 150

Step 1: Power down the motorcycle completely by removing the key to ensure safe installation conditions.
Step 2: Locate the original dashboard wiring harness connector and detach the old instrument panel plug.
Step 3: Connect each wire according to the provided diagram, matching corresponding connections (insulation tape recommended).
Step 4: First connect ground wire (green) and positive power wire (black), then power on to verify screen illumination.
Step 5: Test turn signals, gear display, fuel level signals and confirm proper operation before securing dashboard.
Step 6: After installation, start motorcycle and re-check synchronization of all functions.

◎  Speed: The maximum speed shown is 199 km/h.

◎  Mileage: The total shown is 999999 km, automatically reset; the distance of the last trip (TRIP) is 999. km.

◎  RPM: The maximum rotation speed shown is 12000 r/min, with a precision of 500 r/min, indicated by a light.

◎  Fuel Level: The fuel gauge shows a value between 86Ω±3Ω, and the light turns on according to the fuel level.

◎  Indicator Lights: The left and right lights turn on in green, the remote position light in blue, and the warning light in orange.

◎  Backlight: The brightness of the light is not adjustable.

1. To prevent product damage from incorrect wiring, if you lack installation experience, consult a motorcycle mechanic for professional installation.

2. Each product is tested before shipment. After installation, if functions don't work properly, first check wiring connections. If problems persist, consult a mechanic. If panel is defective without cause after inspection, contact our after-sales service.